Page 1 of 1
Leporacanthicus Joselimai max size
Posted: 09 Feb 2003, 04:28
by BIGblue
I just found out that my L 264 has a max size of only 10cm. Is this true?
Thanks
Angel
Re: Leporacanthicus Joselimai max size
Posted: 09 Feb 2003, 06:01
by Ben
Naw, you have lots of growth left from this one. I saw one that must have been close to 20cm in a pet store in Halifax Nova Scotia (Canada), though I wouldn't think normally it would go much over 15cm. I would persoanlly love to pick one of these guys up, but can't find any around here. I'll be taking a trip towards Halifax next month, hopefully then I'll find some goodies
BIGblue wrote:I just found out that my L 264 has a max size of only 10cm. Is this true?
Thanks
Angel
Posted: 09 Feb 2003, 17:50
by Cartman
I see them all the time in the 6"+ range for sale here in MN and I've heard from a club member his is close to 8".
Posted: 09 Feb 2003, 18:27
by BIGblue
When I first read that there max size was 10cm, I didn't beleive it. Thats why I double checked here. Thanks all.
Angel
Posted: 09 Feb 2003, 20:06
by STINGRAY
We have sold L264 cats around 6inches in size but they are usually smaller. Bigger specimens may actually be Pseudoacanthicus Spinossus. They are easy to mistake at a glance. A lovely cat all the same
Posted: 09 Feb 2003, 21:44
by Jools
Bear in mind all sizes on Planet are SL unless stated otherwise. 6" = 15cm, which if you take off the tail could be ~ 10cm SL! I seem to remeber they spawn at between 15-17cm, but I couldn't tell you if this is SL or TL.
Jools
Posted: 09 Feb 2003, 22:00
by Achim
Hi,
between 15-17cm, but I couldn't tell you if this is SL or TL.
Sprenger and Seidel don't tell in their breeding article explicitly if it is SL or TL, so i guess its TL. According to them
Leporacanthicus joselimaianus grows like
L. heterodon to a total length of about 20cm.
Sprenger, A. & Seidel, I. 2002
Rüsselzahnwelse im Aquarium
DATZ Sonderheft Harnischwelse: 54-59
Greetings... Achim
Posted: 09 Feb 2003, 22:40
by BIGblue
what does SL and TL mean?
Angel
Posted: 09 Feb 2003, 22:48
by Rusty
- SL (Standard Length) refers to the distance from the tip of the snout to the base of the caudal fin (tail).
- FL (Fork Length) refers to the distance between the tip of the snout and the fork in the tail.
- TL (Total Length) is the total length of the fish, from snout to the tip of the tail.
Hope this helps.
Rusty
Posted: 09 Feb 2003, 23:01
by Jools
Rusty wrote:- SL (Standard Length) refers to the distance from the tip of the snout to the base of the caudal fin (tail).
- FL (Fork Length) refers to the distance between the tip of the snout and the fork in the tail.
- TL (Total Length) is the total length of the fish, from snout to the tip of the tail.
Hope this helps.
Rusty
Now that's one for the FAQ!
Jools
Posted: 10 Feb 2003, 01:38
by BIGblue
Thanks Rusty.
Angel
Posted: 02 Nov 2003, 15:47
by Jools
BIGblue wrote:what does SL and TL mean?
Angel
I will add this and Rusty's subsequent reply to the
FAQ.
Jools
10 cms?
Posted: 02 Nov 2003, 17:35
by Giovanna Galvani
When I bought the Galaxias I saw at my aquarium shop one of them at last 25 cms and very very BIG and FAT!
Giovanna
Posted: 02 Nov 2003, 17:59
by Walter
Hi,
but normally You don´t count caudal filaments to the TL. (e.g. Loricaria simillima, ...)