Cave for Pseudomystus siamensis

All posts regarding the care and breeding of catfishes from Asia.
Post Reply
aeroflight
Posts: 83
Joined: 15 Feb 2003, 23:16
Location 1: Albuquerque, NM, USA

Cave for Pseudomystus siamensis

Post by aeroflight »

I need to get a better cave for my Pseudomystus siamensis. While I've got plenty of driftwood and slate providing cover for my plecs and pictus cats, there isn't a totally dark cave for the siamese cat. I'm thinking of getting a black pvc pipe for him, but am unsure about the best dimensions (length and diameter). Anyone have any suggestions? Right now the cat's only about 3", but I'd like to get something with some growing room, too. Should I cap off one end, or leave both ends open? Thanks!
My wife likes cats.
I like catfish.
User avatar
Silurus
Posts: 12420
Joined: 31 Dec 2002, 11:35
I've donated: $12.00!
My articles: 55
My images: 893
My catfish: 1
My cats species list: 90 (i:0, k:0)
Spotted: 424
Location 1: Singapore
Location 2: Moderator Emeritus

Post by Silurus »

A pipe about 2.5" in diameter and about 8" long would be a good size. Leave it open at both ends. I've found that cats tend to prefer open-ended pipes (probably because they can scoot in from either end).
Image
aeroflight
Posts: 83
Joined: 15 Feb 2003, 23:16
Location 1: Albuquerque, NM, USA

Post by aeroflight »

Thanks Silurus! I'll have to head down to Home Depot after work today.
My wife likes cats.
I like catfish.
FatCat
Posts: 87
Joined: 02 May 2003, 01:10
Location 1: Kansas USA
Interests: Fish, Wildlife, Computers, Music

Post by FatCat »

Tell ya what I do for my cats. Its alot of work but very visually apealing in the tank and the fish love them so that they defend them tenaciousely. I hunted out several nice size and shape peices of sandstone. Sandstone can be formed very easily for the inside and outside of your fishes cave so that it it looks good and makes a nice home for your fish. I use a hammer, chizel and a drill with masonry bit. I honeycombed the inside of the cave out with the drill to the size that i liked, then chizled out the drilled area out to make it hollow. Repeat the same steps with the doorway and its a done deal. I also took off some of the outside as it chips off easily to make it the shape i like.Then rube it with a hard brush or rag to polish the chizel marks from the outside and it looks nice and natural. You have to be very careful as they can break very easily just about the time that you are taking off the last piece :x . Then all kinds of things need repaired after you proceed to kick and throw anything in sight :evil: . Anyway it gets easier after you do your first one :lol: .
aeroflight
Posts: 83
Joined: 15 Feb 2003, 23:16
Location 1: Albuquerque, NM, USA

Post by aeroflight »

That's a good idea. It's a little more aesthetically pleasing, too. I was trying to think up ways to hide the pvc pipe so it wouldn't be an eyesore. :lol:
My wife likes cats.
I like catfish.
SunflwrgrlS
Posts: 22
Joined: 02 Aug 2003, 19:35
Location 1: Henderson, NC

Post by SunflwrgrlS »

I've been thinking about rolling the pipe in aquarium sealant and then rolling it in aquarium gravel then letting it dry. Any one try this before? How does it look?
FatCat
Posts: 87
Joined: 02 May 2003, 01:10
Location 1: Kansas USA
Interests: Fish, Wildlife, Computers, Music

Post by FatCat »

that sounds like a pretty cool idea considering how easy pvc is, then what you had in mind in adition would be a relatively easy way to avoid the ugly pvc look. Good idea! 8)
User avatar
Sid Guppy
Posts: 757
Joined: 31 Dec 2002, 15:36
Location 1: Brabant, the Netherlands
Interests: Catfish, Tanganyikan fish, Rock'n'roll, Fantasy

Post by Sid Guppy »

Exactly what I've done with mine; I didn't use aquasealant, because it can let go (it sticks to glass better than to PVC).
I used the stinking glue (whatever it's called in English) that's specifically made to glue PVC parts to each other.
It "liquifies" the PVC; I then rolled it through dry riversand. It hardens in an hour or so, and I stuck it in a bucket with water and a nylon filled with activated carbon (those chemical glues are toxic!).
After a few waterchanges in the bucket, and leaving it in there for a few days (to make the carbon mop up all kinds of molecules), I use them in the tank.
Plan B should not automatically be twice as much explosives as Plan A
SunflwrgrlS
Posts: 22
Joined: 02 Aug 2003, 19:35
Location 1: Henderson, NC

Post by SunflwrgrlS »

I've recently found those little igloos made for small rodents, and I thought they would make great caves too. I bought one but haven't glued the gravel on it yet.

My cave turned out great and my Chinese Algae Eater has taken it for his own -- so I have to make something else (the igloo) for the Clown Loaches.
kateswan
Posts: 87
Joined: 02 Oct 2003, 21:51
Location 1: US, Northern MI

Post by kateswan »

I was looking for a hiding cave fof some botia modestas,
and brought home one of those clay strawberry planters -
wide mouth with the little side openings. I tilted it a bit
downward, and the botias love it! They shoot in and out
of the side openings, and even the pictus cat tried hiding
in it, although it looks like the loaches have won ownership.

Kathy S
"Animals without backbones hid from each other or fell down."
magnum4
Posts: 745
Joined: 14 Sep 2003, 22:04
Location 1: UK wirral
Interests: all things aquatic.

Post by magnum4 »

I used the stinking glue (whatever it's called in English) that's specifically made to glue PVC parts to each other.
= weld-on.
User avatar
Jools
Expert
Posts: 16140
Joined: 30 Dec 2002, 15:25
My articles: 198
My images: 948
My catfish: 237
My cats species list: 87 (i:237, k:1)
My BLogs: 7 (i:10, p:202)
My Wishlist: 23
Spotted: 450
Location 1: Middle Earth,
Location 2: Scotland
Interests: All things aquatic, Sci-Fi, photography and travel. Oh, and beer.
Contact:

Post by Jools »

SunflwrgrlS wrote:I've been thinking about rolling the pipe in aquarium sealant and then rolling it in aquarium gravel then letting it dry. Any one try this before? How does it look?
I did this with crushed slate and it looks good but I was a bit worried about sharp edges. Also, if the PVC pipe floats (oddly some do and some don't) it isn't heavy enough to make it sink.

Jools
SunflwrgrlS
Posts: 22
Joined: 02 Aug 2003, 19:35
Location 1: Henderson, NC

Post by SunflwrgrlS »

Well, I used bigger pipes, and they worked fine. I only put the gravel on the top, and burried the bottom into the substrate just a bit. My CAE loves his cave. I found it easier, if using aquarium sealant, to actually dab the sealant on each piece of gravel, then stick it on -- yes, that is more time consuming, but the gravel sticks better. I haven't had a problem with the gravel coming off yet.

The one I did by rolling in sealant and then sand has grown some algae in the sand, turning it greenish -- but it looks pretty good and I like it that way.

I purchased heavy PVC I guess -- I didn't use pipes but more the connectors with the three holes. I figured my fish would like those better. They are shaped kind of like a T .
User avatar
Shane
Expert
Posts: 4625
Joined: 30 Dec 2002, 22:12
My articles: 69
My images: 161
My catfish: 75
My cats species list: 4 (i:75, k:0)
My aquaria list: 5 (i:5)
Spotted: 99
Location 1: Tysons
Location 2: Virginia
Contact:

Post by Shane »

The best looking "pipes" are simply sections of bamboo. You can wait for it to sink or crazy glue 3-6 inch sections to pieces of slate. A few minutes in the woods with a machete and you can have all you want in various diameters. You can also check garden supply stores.
-Shane
"My journey is at an end and the tale is told. The reader who has followed so faithfully and so far, they have the right to ask, what do I bring back? It can be summed up in three words. Concentrate upon Uganda."
Winston Churchill, My African Journey
SunflwrgrlS
Posts: 22
Joined: 02 Aug 2003, 19:35
Location 1: Henderson, NC

Post by SunflwrgrlS »

Interesting concept about the bamboo -- but unfortunately, I lack both a machete and a bamboo forrest. I don't trust bamboo in garden centers here, I just worry it will be treated with something or have been grown with pesticides.

Maybe you ought to export bamboo for us :D
Post Reply

Return to “Asian Catfishes”