Building a pvc heater/reactor manifold
Posted: 25 Aug 2006, 04:19
My Goal: Remove ALL equipment from inside the tank by drilling the glass and installing bulkheads, then design and build a manifold to facilitate ALL equipment.
Tank: All Glass 37 Gallon 30x12x22
Stand and Canopy: Custom made and finished in Black
Filtration: Fluval 304 with foam pre filters, one tray of bio balls, one tray of ceramic media, and one tray of Seachem Renew.
Heating: Hydor ETH 201
Day Lighting: Icecap 2 bulb retrofit kit w/430 ballast and 2-24รข?
Tank: All Glass 37 Gallon 30x12x22
Stand and Canopy: Custom made and finished in Black
Filtration: Fluval 304 with foam pre filters, one tray of bio balls, one tray of ceramic media, and one tray of Seachem Renew.
Heating: Hydor ETH 201
Day Lighting: Icecap 2 bulb retrofit kit w/430 ballast and 2-24รข?
