Cave for Pseudomystus siamensis
-
- Posts: 83
- Joined: 15 Feb 2003, 23:16
- Location 1: Albuquerque, NM, USA
Cave for Pseudomystus siamensis
I need to get a better cave for my Pseudomystus siamensis. While I've got plenty of driftwood and slate providing cover for my plecs and pictus cats, there isn't a totally dark cave for the siamese cat. I'm thinking of getting a black pvc pipe for him, but am unsure about the best dimensions (length and diameter). Anyone have any suggestions? Right now the cat's only about 3", but I'd like to get something with some growing room, too. Should I cap off one end, or leave both ends open? Thanks!
My wife likes cats.
I like catfish.
I like catfish.
- Silurus
- Posts: 12419
- Joined: 31 Dec 2002, 11:35
- I've donated: $12.00!
- My articles: 55
- My images: 893
- My catfish: 1
- My cats species list: 90 (i:1, k:0)
- Spotted: 424
- Location 1: Singapore
- Location 2: Moderator Emeritus
-
- Posts: 83
- Joined: 15 Feb 2003, 23:16
- Location 1: Albuquerque, NM, USA
-
- Posts: 87
- Joined: 02 May 2003, 01:10
- Location 1: Kansas USA
- Interests: Fish, Wildlife, Computers, Music
Tell ya what I do for my cats. Its alot of work but very visually apealing in the tank and the fish love them so that they defend them tenaciousely. I hunted out several nice size and shape peices of sandstone. Sandstone can be formed very easily for the inside and outside of your fishes cave so that it it looks good and makes a nice home for your fish. I use a hammer, chizel and a drill with masonry bit. I honeycombed the inside of the cave out with the drill to the size that i liked, then chizled out the drilled area out to make it hollow. Repeat the same steps with the doorway and its a done deal. I also took off some of the outside as it chips off easily to make it the shape i like.Then rube it with a hard brush or rag to polish the chizel marks from the outside and it looks nice and natural. You have to be very careful as they can break very easily just about the time that you are taking off the last piece . Then all kinds of things need repaired after you proceed to kick and throw anything in sight . Anyway it gets easier after you do your first one .
-
- Posts: 83
- Joined: 15 Feb 2003, 23:16
- Location 1: Albuquerque, NM, USA
-
- Posts: 22
- Joined: 02 Aug 2003, 19:35
- Location 1: Henderson, NC
- Sid Guppy
- Posts: 757
- Joined: 31 Dec 2002, 15:36
- Location 1: Brabant, the Netherlands
- Interests: Catfish, Tanganyikan fish, Rock'n'roll, Fantasy
Exactly what I've done with mine; I didn't use aquasealant, because it can let go (it sticks to glass better than to PVC).
I used the stinking glue (whatever it's called in English) that's specifically made to glue PVC parts to each other.
It "liquifies" the PVC; I then rolled it through dry riversand. It hardens in an hour or so, and I stuck it in a bucket with water and a nylon filled with activated carbon (those chemical glues are toxic!).
After a few waterchanges in the bucket, and leaving it in there for a few days (to make the carbon mop up all kinds of molecules), I use them in the tank.
I used the stinking glue (whatever it's called in English) that's specifically made to glue PVC parts to each other.
It "liquifies" the PVC; I then rolled it through dry riversand. It hardens in an hour or so, and I stuck it in a bucket with water and a nylon filled with activated carbon (those chemical glues are toxic!).
After a few waterchanges in the bucket, and leaving it in there for a few days (to make the carbon mop up all kinds of molecules), I use them in the tank.
Plan B should not automatically be twice as much explosives as Plan A
-
- Posts: 22
- Joined: 02 Aug 2003, 19:35
- Location 1: Henderson, NC
I've recently found those little igloos made for small rodents, and I thought they would make great caves too. I bought one but haven't glued the gravel on it yet.
My cave turned out great and my Chinese Algae Eater has taken it for his own -- so I have to make something else (the igloo) for the Clown Loaches.
My cave turned out great and my Chinese Algae Eater has taken it for his own -- so I have to make something else (the igloo) for the Clown Loaches.
I was looking for a hiding cave fof some botia modestas,
and brought home one of those clay strawberry planters -
wide mouth with the little side openings. I tilted it a bit
downward, and the botias love it! They shoot in and out
of the side openings, and even the pictus cat tried hiding
in it, although it looks like the loaches have won ownership.
Kathy S
and brought home one of those clay strawberry planters -
wide mouth with the little side openings. I tilted it a bit
downward, and the botias love it! They shoot in and out
of the side openings, and even the pictus cat tried hiding
in it, although it looks like the loaches have won ownership.
Kathy S
"Animals without backbones hid from each other or fell down."
- Jools
- Expert
- Posts: 16138
- Joined: 30 Dec 2002, 15:25
- My articles: 198
- My images: 948
- My catfish: 237
- My cats species list: 87 (i:237, k:1)
- My BLogs: 7 (i:10, p:202)
- My Wishlist: 23
- Spotted: 450
- Location 1: Middle Earth,
- Location 2: Scotland
- Interests: All things aquatic, Sci-Fi, photography and travel. Oh, and beer.
- Contact:
I did this with crushed slate and it looks good but I was a bit worried about sharp edges. Also, if the PVC pipe floats (oddly some do and some don't) it isn't heavy enough to make it sink.SunflwrgrlS wrote:I've been thinking about rolling the pipe in aquarium sealant and then rolling it in aquarium gravel then letting it dry. Any one try this before? How does it look?
Jools
Owner, AquaticRepublic.com, PlanetCatfish.com & ZebraPleco.com. Please consider donating towards this site's running costs.
-
- Posts: 22
- Joined: 02 Aug 2003, 19:35
- Location 1: Henderson, NC
Well, I used bigger pipes, and they worked fine. I only put the gravel on the top, and burried the bottom into the substrate just a bit. My CAE loves his cave. I found it easier, if using aquarium sealant, to actually dab the sealant on each piece of gravel, then stick it on -- yes, that is more time consuming, but the gravel sticks better. I haven't had a problem with the gravel coming off yet.
The one I did by rolling in sealant and then sand has grown some algae in the sand, turning it greenish -- but it looks pretty good and I like it that way.
I purchased heavy PVC I guess -- I didn't use pipes but more the connectors with the three holes. I figured my fish would like those better. They are shaped kind of like a T .
The one I did by rolling in sealant and then sand has grown some algae in the sand, turning it greenish -- but it looks pretty good and I like it that way.
I purchased heavy PVC I guess -- I didn't use pipes but more the connectors with the three holes. I figured my fish would like those better. They are shaped kind of like a T .
- Shane
- Expert
- Posts: 4625
- Joined: 30 Dec 2002, 22:12
- My articles: 69
- My images: 161
- My catfish: 75
- My cats species list: 4 (i:75, k:0)
- My aquaria list: 5 (i:5)
- Spotted: 99
- Location 1: Tysons
- Location 2: Virginia
- Contact:
The best looking "pipes" are simply sections of bamboo. You can wait for it to sink or crazy glue 3-6 inch sections to pieces of slate. A few minutes in the woods with a machete and you can have all you want in various diameters. You can also check garden supply stores.
-Shane
-Shane
"My journey is at an end and the tale is told. The reader who has followed so faithfully and so far, they have the right to ask, what do I bring back? It can be summed up in three words. Concentrate upon Uganda."
Winston Churchill, My African Journey
Winston Churchill, My African Journey
-
- Posts: 22
- Joined: 02 Aug 2003, 19:35
- Location 1: Henderson, NC